top of page

25, 40 & 50 AMP Rated

"COOL ONE" PANEL Mount Zero Cross Time Based SSR Controller

Anacon Power & Controls SCR Controller's are designed to offer proven solutions to both Phase Angle and Burst Fire applications. Our Burst Fire SCR Controllers operate by varying the duty cycle of an SSR's control input.  The power delivered to the load is proportional to the command input signal from four selectable time bases. (200ms, 1 sec, 10 sec & 100 sec.) SCR Controllers allow you to apply more precise control to any heater application, regardless of the type of heater elements you choose.

SSR Controller PANEL Mount Zero Cross Time Based Rated

Standard "Cool One" Features:

  • Touch Safe Versions now Available

  • Current Ratings from 0.1A to 50A

  • Standard LED Status Indicator

  • UL/cUL Recognized TUV Approved & CE Compliant Version

  • Input Options:  4-20mA, 0-10V, 0-5V, 0-135Ω, Potentiometer

  • Built in Transient Protection

  • Configurable for 4 different cycle times

  • Drives multiple solid state relays (SSRs)

  • Mounts on SSR input screws

  • Touch-safe cover compatible

  • Limited 2 Year Warranty

  • Safety & Noise Immunity Compliance

  • Control Information & Typical Wiring Diagram

SPECIFICATIONS

PART NUMBER

INPUT

RANGE

ASSEMBLY LOAD CURRENT

(AMPS AC)

LINE

VOLTAGE

TRANSIENT VOLTAGE

RELAY RATING

APCSCR25HLZP

4-20mA, 0-10V, 0-5V,
0-135Ω, Potentiometer

.1A-25A Max @ 40°C Ambient

48-660Vac

25A

4-20mA, 0-10V, 0-5V,
0-135Ω, Potentiometer

.1A-40A Max @ 40°C Ambient

48-660Vac

1200V Peak

40A

4-20mA, 0-10V, 0-5V,
0-135Ω, Potentiometer

.1A-50A Max @ 40°C Ambient

48-660Vac

50A

APCSCR40THL

(Example)

Touch Safe versions are also available, add the letter "T" after the
rating number in the standard part number.

APCSCR40HLZP

APCSCR50HLZP

1200V Peak

1200V Peak

Notes:

  • Ratings based upon 100% duty cycle for 20 minutes or 80% duty cycle continuous.

  • Ratings are based upon relays being mounted either individually or side by side with zero spacing.

  • Cool One's unique construction allows better performance than conventional heat sink designs even when mounted side by side

THERMAL  CURVES

Control Information & Typical Wiring Diagram

The Zero Cross SSR Controller output drive is a DC pulsed current limited drive signal of 10V/15mA (24VAC power) or 10V/9.5mA (24VDC power).  This is more than enough current for driving most 3-32V standard SSRs, however it is still important to review the data sheet for the SSR you would like to use for compatibility with the Zero Cross SSR Controller's output drive.  The following graph will allow you to verify the SSR's compatibility with the APCSCR1Z over wide input voltage variations.

(4-20mA, 0-5V, 0-10V Inputs)

See User Manual for complete list of commands & wiring options.

Address

Anacon Power & Controls

100 Powder Mill Rd. Suite 162

Acton, MA 01720

Phone

TEL: 800-466-9080
TEL: 978-287-0715

Email

sales@anaconusa.com

bottom of page